oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 821-if70.0m-19d 70.0 mhz if saw filter 19.40 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 821-if70.0m-19d january 2011 rev a 70.0 mhz if saw filter 19.40 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i ground j input e output test fixture & values input l1=150nh, c1=2pf output l2=150nh source/load impedance 50 ?
oscilent part number 821-if70.0m-19d january 2011 rev a 70.0 mhz if saw filter 19.40 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -5 - 80 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 70.0 - insertion loss at fo db - 23.60 25.00 group delay variation (fo9.42mhz) nsec - 37 70 absolute delay usec - 2.32 2.50 passband ripple (fo9.42mhz) db - 0.63 1.00 bandwidth at -1db mhz 19.25 19.40 - bandwidth at -3db mhz - 19.65 - bandwidth at -40db mhz - 20.82 - bandwidth at -50db mhz - 20.97 21.06 ultimate rejection db 50 53 - temperature coefficient ppm/ c - -72 -
oscilent part number 821-if70.0m-19d january 2011 rev a 70.0 mhz if saw filter 19.40 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db bandwidth at ?50.0 db
oscilent part number 821-if70.0m-19d january 2011 rev a 70.0 mhz if saw filter 19.40 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo9.42mhz group delay variation fo9.42mhz smith chart
oscilent part number 821-if70.0m-19d january 2011 rev a 70.0 mhz if saw filter 19.40 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|